County, Galway


+353 87 395 6099

24/7 Customer Support

Mon - Fri: 9:00 - 17:30

The Quick Guide to Parquet Floor Restoration

Share on facebook
Share on twitter

Parquet floors are frequently used in every family, which have anti-slip qualities that are safe for users’ health while also contributing to increased aesthetics.

Due to a variety of factors, using parquet floors will cause them to swell, sustain damage, and have a shorter lifespan. The article will find out the causes of damaged parquet floors in this article.

Iconic Cleaning will also discuss the best ways to have a proper parquet floor restoration.

So, let’s check it out together!

Parquet floor common deteriorate symptoms and reasons

There are several causes for parquet floors to require repairs. It is significant to note that pre-steaming without professional advice, pulling up damaged blocks, setting off a chain reaction that results in the removal of more blocks than were initially required.

Consequently, you should first seek the advice of a professional.

Parquet floor common deteriorate symptoms and reasons
Parquet floor common deteriorate symptoms and reasons

The following are a few of the most frequent issues that owners of original parquet floors encounter:

  • Missing blocks.
  • Loose or unstable blocks.
  • The distance between pieces.
  • Discrepant surfaces or elevated floors.
  • Damage like scuffs and stains.

Starting parquet floor restoration with…

No one can ignore Parquet floor common deteriorate symptoms when faced with negative outcomes, right? Therefore, it’s crucial to figure out how to have a proper parquet floor restoration.

There are many equipment that can be used to have a proper parquet floor restoration, but mainly are Drum Sander, Edge or Random-Orbit Sander, Floor Buffer, Stain and Finish Applicators. So, starting the floor restoration with…

Necessary equipment for parquet floor restoration
Necessary equipment for parquet floor restoration

#1 – Drum Sander

A drum sander, which looks like a vintage vacuum cleaner from the middle of the 20th century, was the first piece of machinery used when having a parquet floor restoration.

The majority of the dust produced during the sanding process is collected by a back pocket on drum sanders.

#2 – Edge or Random-Orbit Sander

Sanding the floor’s perimeter is also necessary for a quality parquet floor restoration. You can sand this area using an orbital sander or an edge grinder.

These are tiny sanders used in small closets, corners, and other confined spaces that drum sanders cannot access.

You must use both hands to operate an edge sander, and even then, it can be challenging to control if you are inexperienced.

For this reason, you might want to practice in a hidden area first.

#3 – Floor Buffer

The floor will have scratches from the sandpaper after being sanded with a drum sander and a random edge or trajectory sander.

These cracks and any other stains on the floorboards need to be taken care of before painting the finish. This is possible with a floor buffer that has a screen disk attached.

When using a buffer, begin in the middle of the floor and strike the buffer in the direction of the parquet grain.

#4 – Stain and Finish Applicators

Applying the stain and the new finish is the last step in the process of parquet floor restoration. By dipping a rag in the stain and wiping it on the floor, stains are applied to the flooring.

As you can see above, the process and the equipment for parquet floor restoration are complicated. But, don’t worry, Iconic Cleaning got your back!

There are some challenges, but you know what. . . Iconic Cleaning can help you out!

Iconic Cleaning is always aware of your challenges regarding parquet floor restoration. That takes a lot of time and effort, especially for large concrete floors.

Wooden floors cannot be cleaned by one person without assistance. So, the Iconic Cleaning team has gathered some common parquet floor symptoms and solutions to help you figure out the floor restoration problem:

Come and check these out!

Iconic Cleaning can help you with your parquet floor restoration
Iconic Cleaning can help you with your parquet floor restoration

How to replace missing parquets?

It is best to look for recovered blocks that match the original blocks if you discover missing or irreparable blocks. They can then be attached to the subfloor with a suitable adhesive as long as they are the same size and thickness.

The biggest challenge here is finding replacement parquet blocks of the right type and size.

To identify the type of parquet, it is best to sand a small area with a hand sander.

After that, look for blocks at the usual places, such as recovered buildings, eBay, etc. Iconic Cleaning can help you with that!

How to fix loose and unstable blocks?

The most typical fix for loose wood floors is to remove the problematic blocks, remove any remaining glue, and then reinstall them using a suitable flexible floor adhesive.

Actually, you can complete it yourself. However, if it turns out that the subfloor is what’s wrong, perhaps because it’s uneven or moving, you’ll need assistance, and Iconic Cleaning is the ideal solution!

How to fix the gaps in the parquet floor?

Our typical solution is to fill the spaces with a mixture made of the fine dust left over after sanding the floor and either rosin filler or cellulose hardener.

This glue layer will be blown into the gaps and forced there. The excess filler must then be cleaned off and the surface lightly sanded.

How to restore damaged parquet floors?

You will need an expert orbital sander to sand damaged parquet floors, and you’ll definitely need Iconic Cleaning.

When having parquet floor restoration, it’s critical to use the proper tools because using the incorrect kind of sander could result in issues due to the angle at which the blocks are positioned.

The floor can be finished with a suitable lacquer, wax, or oil after sanding is complete.

Iconic Cleaning has an effective surface parquet floor restoration service from our professionals, experienced personnel, and professional workers. Check out our Iconic Cleaning blogs right away to discover more about our services!

The ultimate tips when you start restoring your parquet floor

When using, everyone should be mindful of the following to minimize damage to parquet floors:

  • Keep water away from the wooden floor and out of direct contact with it. Particularly the floor area near the fixtures that use water frequently, like the sink and bathroom.
  • When moving heavy objects, do not drag on the floor because it can scratch the coating. In addition to reducing the floor’s aesthetic appeal, this makes it easier for moisture and water to seep underneath the floor.
  • Contact Iconic Cleaning to have parquet flooring regularly cleaned, maintained, and polished to increase their durability.
  • Pay close attention to the wooden floor and take immediate action if you notice any signs of damage.
Tips for using parquet flooring
Tips for using parquet flooring

Iconic Cleaning Parquet Flooring Restoration Service – Contact Us!

Hopefully, the article can help you understand the parquet flooring restoration and some tips to maintain parquet flooring. You can also refer to Iconic Cleaning’s service to ensure your home and your parquet flooring is always maintained and clean.

If the audience wants to save precious time, just call Iconic Cleaning via 087 395 6099 or the Iconic Cleaning website.

5 Tips & 6 Ways For Vinyl Floor Cleaning
A Definitive Guide to Marmoleum Floor Cleaning